Call +1 (239) 229-9870ted@arcraftstudios.com
FGCU Alico Arena Addition, Estero

Questions answered

New Construction, Renovations & Flood Rules in Southwest Florida

Flood zones, wind loads and the 50% rule shape nearly every project on this coast. These answers explain the ideas; the numbers that apply to your property come from your jurisdiction.

Ask Us Your Question

Shown: FGCU Alico Arena Addition, Estero

Reviewed November 17, 2026 by Ted Sottong, AIA. General information for property owners in Lee and Collier County; requirements vary by jurisdiction and property, so talk with us about your specific project.

What does the FEMA “50% rule” mean for my renovation, and how is it measured?

In a flood zone, if the cost of improving or repairing a building equals or exceeds 50% of the building's market value (the structure, not the land), the whole building must be brought up to current flood requirements, which often means elevating it.

How value is determined, and whether work is added up over a period of time, varies by community.

How do flood zones and base flood elevation affect design and cost?

Your flood zone sets the minimum height of the lowest floor and limits how the space below can be built and used. That affects the foundation, stairs and access, equipment locations and insurance, so we confirm it before design begins.

How do I know whether to renovate or rebuild?

Compare the cost and limits of renovating, including whether the 50% rule would be triggered, against a new building designed to current code. A feasibility study lays both out side by side.

What did the post-hurricane code and permitting changes mean for owners?

After recent storms, many owners met substantial-damage reviews, updated flood maps and closer tracking of repair costs. The details differ by jurisdiction and are still changing.

How does the Florida Building Code's wind-load requirement affect design?

It affects the structure, the roof, and every window and door. Buildings must resist the design wind speed for their location, and in much of Southwest Florida openings must be impact-rated or protected.

How do HOA or architectural review boards fit into the schedule?

Their review is separate from the building permit and often runs on a monthly meeting calendar. We plan submittals around those dates so the reviews overlap where possible.

What do I need before an architect can start?

A current survey is the usual starting point. Some sites also need a topographic survey, a soils (geotechnical) report, and a zoning check. We'll tell you which ones your project needs.

Which construction type is right for my new building: concrete block, wood frame, steel or pre-engineered metal?

It depends on the use, the open spans you need, the budget, local design standards, and the wind and flood requirements for the site. Pre-engineered metal construction suits large, open, economical spaces such as warehouses, shops and some worship or commercial buildings.

Concrete block is common for homes and smaller commercial buildings in Southwest Florida.

Can new construction that uses a pre-engineered metal building meet local design standards?

Often, yes. With a designed entry, a masonry or stucco base, considered window patterns and roof forms, a metal building can be designed to address local design standards. Some jurisdictions restrict exposed metal panels facing the street, so the standards should be checked first.

Does new construction with a pre-engineered metal frame still need an architect?

Generally, yes. The manufacturer engineers the frame. The permit typically also needs a site plan, foundation design, life-safety and accessibility review, and energy compliance, coordinated into one set.

What does a feasibility study cover?

It answers what you can build before you commit to full design: zoning and setbacks, flood requirements, utilities, a rough layout, and the approvals you'll need. It is usually the least expensive point at which to find a deal-breaker.

Start with a conversation

Tell us what you're building.

+1 (239) 229-9870 · ted@arcraftstudios.com

Request a Consultation

Our clients describe the work in their own words.

Read our Google reviews